• 1

Gigabit fiber optic transceiver (one light and 8 electricity)

Short Description:

1 1.25Gbps optical port, 8 10/100/1000Mbps auto-adaptive electrical ports
Support MDI/MDI-X self-adaptation, full/half duplex self-adaptation
Single-mode dual-fiber SC interface mode, the optical fiber transmission distance can reach 20KM
Dynamic LED indicator, real-time display of the current working status of the device
Simple to use, plug and play, no setup required
Working temperature support -20℃~70℃
Exquisite iron shell design, support rack-mounted installation


Product Detail

Product Tags

product description:

This product is a gigabit fiber optic transceiver with 1 gigabit optical port and 8 1000Base-T(X) adaptive Ethernet RJ45 ports. It can help users realize the functions of Ethernet data exchange, aggregation and long-distance optical transmission. The device adopts fanless and low power consumption design, which has the advantages of convenient use, small size and simple maintenance. The product design conforms to the Ethernet standard, and the performance is stable and reliable. The equipment can be widely used in various broadband data transmission fields such as intelligent transportation, telecommunications, security, financial securities, customs, shipping, electric power, water conservancy and oil fields.

1 (2)
1 (3)
1 (2)
model CF-1028GSW-20
network port 8×10/100/1000Base-T Ethernet ports
Fiber port 1×1000Base-FX SC interface
Power interface DC
led PWR, FDX, FX, TP, SD/SPD1, SPD2
rate 100M
light wavelength TX1310/RX1550nm
web standard IEEE802.3, IEEE802.3u, IEEE802.3z
Transmission distance 20KM
transfer mode full duplex/half duplex
IP rating IP30
Backplane bandwidth 18Gbps
packet forwarding rate 13.4Mpps
Input voltage DC 5V
Power consumption Full load<5W
Operating temperature -20℃ ~ +70℃
storage temperature -15℃ ~ +35℃
Working humidity 5%-95% (no condensation)
Cooling method fanless
Dimensions (LxDxH) 145mm×80mm×28mm
weight 200g
Installation method Desktop/Wall Mount
Certification CE, FCC, ROHS
LED indicator condition meaning
SD/SPD1 Bright The current electrical port rate is gigabit
SPD2 Bright The current electrical port rate is 100M
extinguish The current electrical port rate is 10M
FX Bright Optical port connection is normal
flicker Optical port has data transmission
TP Bright The electrical connection is normal
flicker The electrical port has data transmission
FDX Bright The current port is working in full duplex state
extinguish The current port is working in half-duplex state
PWR Bright Power is OK

 

What are the indicators of optical fiber transceiver chip performance?
1. Network management function

Network management can not only improve network efficiency, but also guarantee network reliability. However, the manpower and material resources required to develop a fiber optic transceiver with network management function far exceed those of similar products without network management, which are mainly reflected in four aspects: hardware investment, software investment, debugging work, and personnel investment.

1. Hardware investment

To realize the network management function of the optical fiber transceiver, it is necessary to configure a network management information processing unit on the circuit board of the transceiver to process the network management information. Through this unit, the management interface of the medium conversion chip is used to obtain management information, and the management information is shared with ordinary data on the network. data channel. Optical fiber transceivers with network management function have more types and quantities of components than similar products without network management. Correspondingly, the wiring is complicated and the development cycle is long.

2. Software investment

In addition to hardware wiring, software programming is more important in the research and development of Ethernet fiber optic transceivers with network management functions. The development workload of the network management software is large, including the part of the graphical user interface, the part of the embedded system of the network management module, and the part of the network management information processing unit on the transceiver circuit board. Among them, the embedded system of the network management module is particularly complex, and the R&D threshold is high, and an embedded operating system needs to be used.

3. Debugging work

The debugging of the Ethernet optical transceiver with network management function includes two parts: software debugging and hardware debugging. During debugging, any factor in board routing, component performance, component soldering, PCB board quality, environmental conditions, and software programming can affect the performance of an Ethernet fiber optic transceiver. Debugging personnel must have comprehensive quality, and comprehensively consider various factors of transceiver failure.

4. The input of personnel

The design of ordinary Ethernet fiber optic transceivers can be completed by only one hardware engineer. The design of the Ethernet fiber optic transceiver with network management function not only requires hardware engineers to complete circuit board wiring, but also requires many software engineers to complete the programming of network management, and requires close cooperation between software and hardware designers.

2. Compatibility

OEMC should support common network communication standards such as IEEE802, CISCO ISL, etc., to ensure good compatibility of fiber optic transceivers.

3. Environmental requirements

a. The input and output voltage and the working voltage of OEMC are mostly 5 volts or 3.3 volts, but another important device on the Ethernet fiber optic transceiver - the working voltage of the optical transceiver module is mostly 5 volts. If the two operating voltages are inconsistent, it will increase the complexity of the PCB board wiring.

b. Working temperature. When choosing the working temperature of OEMC, developers need to start from the most unfavorable conditions and leave room for it. For example, the maximum temperature in summer is 40°C, and the inside of the optical fiber transceiver chassis is heated by various components, especially the OEMC. . Therefore, the upper limit index of the operating temperature of the Ethernet fiber optic transceiver should generally not be lower than 50 °C.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • 9-port 10/100M  Media Converter (Single-mode Single-fiber SC)

      9-port 10/100M Media Converter (Single-mode S...

      9-port 10/100M Media Converter (Single-mode Single-fiber SC) Product Features: Introducing Enhanced Optical Transceivers: The Perfect Optical-to-Electrical Converter Are you looking for a reliable, efficient solution to your telecommunications needs? Huizhou Changfei Optoelectronics Technology Co., Ltd.’s 1 optical 8 electrical single-mode single-fiber B terminal is your best choice. As a professional manufacturer of industrial smart network managed switches, PoE switches, Ethernet s...

    • 9-port 10/100/1000M WDM Media Converter (Single-mode Single-fiber SC)A-end

      9-port 10/100/1000M WDM Media Converter (Singl...

      9-port 10/100/1000M WDM Media Converter (Single-mode Single-fiber SC)A-end Product Features: Introducing the cutting-edge optical 8-power single-mode single-fiber gigabit transceiver A-side, the ultimate solution for reliable high-speed data transmission! Huizhou Changfei Optoelectronics Technology Co., Ltd. takes great pride in providing advanced transmission solutions to customers worldwide. With high emphasis on quality products and excellent service, we have won the recognition and app...

    • 100M 1 optical 1 electrical single mode single fiber

      100M 1 optical 1 electrical single mode single ...

      product presentation: This product is a 100M fiber transceiver with 1 100M optical port and 1 100Base-T(X) adaptive Ethernet RJ45 interface. It can help users realize the functions of Ethernet data exchange, aggregation and long-distance optical transmission. The device adopts fanless and low power consumption design, which has the advantages of convenient use, small size and simple maintenance. The product design conforms to the Ethernet standard, and the performan...

    • 1 optical 2 electrical (single mode single fiber SC) B-end high-quality metal

      1 optical 2 electrical (single mode single fibe...

      3-port 10/100M WDM Media Converter (Single-mode Single-fiber SC) Product Features: Introducing Small Fiber Optic Converters – The Perfect Solution for Industrial Communications At Huizhou Changfei Optoelectronics Technology Co., Ltd., we are proud to be a leading professional manufacturer of industrial communication products in China. Our commitment to innovation and delivering high-quality solutions has made us a trusted name in the industry. We are pleased to introduce the newest m...

    • 2-port 10/100/1000M  Media Converter(SFP)

      2-port 10/100/1000M Media Converter(SFP)

      2-port 10/100/1000M  Media Converter(SFP) Product Features: Introducing the Gigabit 1 Optical 1 Electrical SFP Transceiver and the Gigabit 2-Port Ethernet Fiber Converter, two innovative products that have revolutionized data transmission and connectivity. These devices are designed to meet the demands of modern businesses by providing fast and reliable network connectivity. The Gigabit 1 Optical 1 Electrical SFP Transceiver is a versatile and efficient solution for transmitting data over f...

    • 6-port 10/100/1000M  Media Converter (Single-mode Dual-fiber SC)

      6-port 10/100/1000M Media Converter (Single-m...

      6-port 10/100/1000M Media Converter (Single-mode Dual-fiber SC) Product Features: Huizhou Changfei Optoelectronics Technology Co., Ltd. is a leading technology company focusing on high-performance communication equipment and launching compact fiber optic media converters. Designed with advanced features and cutting-edge technology, this product will revolutionize the way you experience the web. Our compact fiber optic media converters combine the power of a gigabit connection with a transm...